Ultrasonic cable height meter uses ultrasonic technology to measure the cable height,overhead clearance and cable sag.With a horizontal accessory bracket,the ultrasonic cable height meter can measure deepness.For example,can be used for depth measurement of a well or elevator shaft.

The cable height meter is handheld meter which is light and easy to use.With six buttons,the cable height meter provides fast and effective measurement without special training.The users just need to stand blow the cable and have no any direct touch to cables and wires.Thus,the ultrasonic cable height meter ensures safety measurement way with a good accuracy.

Technical Features

1.Up to 6 cables measured at a time
 2.Easy operation,easy to aim at the measuring position and reading
 3.Measurement of wire spacing and clearance
 4.Recording measuring parameters:location,time and temperature
 5.Different use for cables
 6.With a larger sensor,higher accuracy can be ensured than the existing cable height meters in market
 7.Auto-calibration(CAL)
 8.Measuring dimension of house and distance between objects

Application
Electricity cable,communication cable, power cable,tram/train power supply cable sag status measurement,elevator shafts, depth of wells.

Technical Specification
Accuracy:0.5% ± 2 digits
 Measurement ranges:
 3 ~ 30m (cable diameter > 25mm)
 3 ~ 15m (cable diameter > 12mm)
 Horizontal Measurement range:3-18m
 Resolution:5mm(<10m)
 10mm(>10m)
 Minimum gap between wires:150mm
 Operation temp.range:-10 to 40 Deg C.
 Power supply: 9V Alkaline battery
 3 ~ 12m (cable diameter > 5.5mm)
 3 ~ 10m (cable diameter > 2.5mm)

Ultrasonic level meter is liquid/solid level measurement device for non-contact level meter for liquid,mix liquid and solid.

Ultrasonic level meter has been widely used in water procession,food,petrochemical and paper making industries for measuring level of fresh water,wasted water,slurries and petrol under the conditions as steam,foam and powder.

Technical Features:

*Non-contact ultrasonic measurement technology

*Powerful transducer with ability of clearing its surface by itself

*Auto temperature compensation

*The new mechanical structure and making technology improving the capability of the transducer

*Infrared programmer and field LCD

*Echo wave displaying by oscilloscope

*Interference suppression by manual profile of echo wave

*Easy installation and maintenance

Measurement principle

The emitter in the sensor is excited electrically and sends an ultrasonic pulse in the direction of the surface of the material which then partially reflects the pulse. This echo is detected by the same sensor,now acting as a directional microphone,and then converted back into an electrical signal.The time between transmission and reception of the pulse(the sonic run time) is directly proportional to the distance between the sensor and the product surface. This distance is determined by the velocity of sound c and the run time t using the formula:

D=c*t/2

For example,if sound c is 344.1m/s(@20 Deg.C and 1 atmospheric pressure),run time t is 50ms and then distance is 8.6m.

Ultrasonic distance meter utilizes ultrasonic time difference technology to measure distance,area and volume.Ultrasonic distance meter has function of laser location pointer,reading unit selection, auto power OFF,and etc.Ultrasonic distance meters are widely used for the measurement of building,house,etc.

Technical Features

*Store and display data used in area and volume calculation
*Calculate sum,area and voluem
*Imperial and metric units selection
*Auto Power Off for saving energy
*Upto 18m distance measurement
*2-postion distance measurement
*With built-in laser pointer(Depending on different model) helps to easy distance measurement.

Ultrasonic Distance Meter Tape Measurement
Technical Specification
*Transmit frequency:40KHz
*Accuracy:+/- 0.5%
*Working temp. 0-50 Deg.C
*Resolution:0.01m
*Weight:100g(inc.battery)
*Max range:18m(In static air)
*Power supply:23A 12V
*Dimension:72×75×33mm

Handheld Ultrasonic Distance Meter Measurement
Technical Specification
*Transmit frequency:40KHz
*Accuracy:+/- 0.5%
*Resolution:0.01m
*Working temp. 0-50 Deg.C
*Weight:100g(inc.battery)
*Max range:18m(In static air)
*Power supply:9V 6F22
*Dimension:128×53×36mm

Ultrasonic thickness gauge adopts the latest micro-process technology with low power consumption and high performance.Based on the pinciple of ultrasonic,ultrasonic thickness gauge can measure wall thickness and sound velocity of various kinds of metal and other material.Can measure pipes and tanks to check the corrosion situation.Ultrasonic thickness gauge are widely used in Petroleum, chemical industry, metallurgy, shipbuilding, aviation and aerospace,and other industries.

Ultrasonic thickness gauge is mainly comprised of three pars:main unit,probe, and cable. Ultrasonic thickness gauge is usually powered by batteries.

Using skills

1.general measurement method

1)Test 2 times on one point.In the two tests, the parting plate should be 90 Deg. with each other, and use the smaller value as the test value

2)30mm multi-point test.When the test value is not stable,take an test point as a center,test many times at the diameeter of 300mm,and take the smaller value as the test value.

2.Line measurement

Use single point measurement on the designated routes and the distance of two point is not over 5mm

3.Gridding measurement

Cross grid on designated area,and measure the designated points.The method has been widely used for corrosive test on high pressure equipment and stainless steel lining.

General Technical Specification

Display:128*64 LCD with LED backligh adjusting function

Measuring range:0.75mm-225.0mm(0.03inch-8.85inch)

Velocity range:1000m/s-9999m/s(0.039-0.394in/us)

Accuracy:+/-0.1mm

Power supply:battery

Communication port: RS232 port

Measuring velocity:20times/second

Storing data:500 groups of datas;5 files(each files including100 groups of datas)